How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners must follow a set of steps that are unique to add a second ignition key. It requires dealer service using a handheld computer dubbed Tech-2. A new key and transponder are required to be purchased and then programmed into the car.
Make sure to rotate your keys in order to prevent one from wearing out quicker than the next. This will also help to keep your keys in good condition.
Replacement Case
The new key fobs do not look like the older Saab keys. They're equipped with electronic devices which make it hard to duplicate. This has made car theft considerably more difficult than it was just a few years ago. However, it has made the replacement of lost keys a much more expensive undertaking.
Saab 9-3 owners should have two working keys. It's expensive to replace a lost key because it requires replacing the CIM module, as well as reconfiguring the locking cylinders. Dealers usually charge between $100-$200 to do this.
There are options to avoid these costs. Some parts suppliers will use the code of the spare key to cut a brand new metal blade for a fraction of the cost of the dealer. The key, however, must be identical to the original one in order to function within your car.
Follow these steps to replace the case. You'll require an open-faced screwdriver and patience. With the screwdriver, slowly pry the plastic apart and then separate the emergency key from the case. Once the case is open take out all electronic components and place them in your new case. Be sure to put the correct key and badge back into the case, as well.
Replacement Battery
The replacement battery for the Saab 9-3 is a low-cost component that can be replaced quickly and easily. This YouTube video by Cyclone Cyd demonstrates the procedure for replacing the battery for the remote fob in just four steps. This guide should work with any modern saab key fob however the procedure might differ slightly.
The first step is to find the button that opens the backup key on the fob. The button is usually found on the back of the fob, right next to the Saab Logo. Next use a flathead screwdriver into the small hole inside this button. This should be enough to open the case so that you can replace the battery.
After the new battery CR1632 is installed it is possible to reassemble the remote key fob, and then program it to your car. The whole process should not exceed an hour. This is a straightforward procedure that doesn't require special tools.
The process can be a bit more complex if you lose the key, but it's possible. The dealer must first read the VIN of the vehicle and order the replacement TWICE module as well as key blade with the proper unique code. The dealer will then have to program the key using MDI which is a new software tool.
Replacement Key Fob
The key fob has an internal battery that is used to lock and unlock your vehicle. The batteries last for a certain time, and they will eventually die. This is a problem that happens with all cars and the good news is that you can change the batteries in a majority of key fobs and not have to replace the entire case. You can buy replacement fobs from Amazon that include all the electronics already installed, which means you can simply open the case and replace the batteries that were in the case. saab car key replacement 'll need to take out the emergency key before you can replace the batteries. To do this, insert a small flathead screwsdriver into the slot that is in the middle of the. The screwdriver should be moved around the case, and it will split open, making it much easier to take it out.
When you are ready to replace the keys, make sure you have a spare because this can cut down your total cost by a substantial amount. If you have an additional key, ask the dealer to cut it in half and program it to your car. This is less expensive than purchasing a new key fob.
It is possible to add another key to your vehicle even if you don't have one, however it requires lots of research and effort. Adding a second key costs a few hundred dollars, and also requires programming of the car's computer. This can be accomplished by a professional, however it's a costly option for the majority of owners.
Replacement Ignition
The new SAAB 9-3 uses an alarm system that is more sophisticated based on a key code. If you lose your sole key, it may be expensive to add another one because the car must include a computer and be programmed to accept a new key. Even dealers can charge hundreds of dollars to program a new key when they are not able to complete the task.
If you've lost your sole working key, a dealer will repair your car's computer (known as the CIM or SAAB TWICE) to create a replacement, and they will charge top dollar for it. Instead we can reprogramme the EEPROM of your current car computer to make it ready for a replacement key, saving you over 50% of what you'll pay at a dealership.
If you have owned a SAAB 9-3 an extended period of time you're aware that the ignition keys are not very durable. They can become incredibly sticky and the buttons are known to fall off of them at times and you should think about purchasing a new one if yours isn't performing as it should. It's not as difficult as you think to replace the ignition key. With the right tools, it can be accomplished in a short time.